I am trying to get a Dell Inspron Laptop reconnected to the net.

I have run Winsock fix etc to get reconnected. I have connected a
Hawking USB device to send this message and to get tall the Windows XP
updates.

Both Wireless and wireless conection fail.

Wired - shows network cable unplugged with cable plugged in. There are
no updates to Broadcom 440x 10/100 controller.
When I right click, I get options - disbale, bridge and properties. I
am running TCP/IP
How do I get the fixed?

No virus and spyware - all fixed. I have added ZA free and Avast AV.

thanks

Hi
Please describe what actually (type of connection and hardware) you use to
connect to the Internet.
Jack (MS, MVP-Networking)


"David Sherman" <dshermin@ameritech.net> wrote in message
news:r6ece49tpjtrf7lva78c31pdi2tgmpmjsi@4ax.com...
>I am trying to get a Dell Inspron Laptop reconnected to the net.
>
> I have run Winsock fix etc to get reconnected. I have connected a
> Hawking USB device to send this message and to get tall the Windows XP
> updates.
>
> Both Wireless and wireless conection fail.
>
> Wired - shows network cable unplugged with cable plugged in. There are
> no updates to Broadcom 440x 10/100 controller.
> When I right click, I get options - disbale, bridge and properties. I
> am running TCP/IP
> How do I get the fixed?
>
> No virus and spyware - all fixed. I have added ZA free and Avast AV.
>
> thanks
>

Windows XP media center on Dell Inspiron E1505. Under network
connections, I right click on wired, it says disable not enable.
Wireless says the same. Wireless sees wireless network, but doesness
connect. It won't even connect to an open network. I am tryung to
connect either to DSL or Cable. Wireless/Wired cards are Broadcom
440x.

thanks



On Fri, 3 Oct 2008 18:11:18 -0400, "Jack \(MVP-Networking\)."
<jack@discussiongroup.com> wrote:

>Hi
>Please describe what actually (type of connection and hardware) you use to
>connect to the Internet.
>Jack (MS, MVP-Networking)
>
>
>"David Sherman" <dshermin@ameritech.net> wrote in message
>news:r6ece49tpjtrf7lva78c31pdi2tgmpmjsi@4ax.com.. .
>>I am trying to get a Dell Inspron Laptop reconnected to the net.
>>
>> I have run Winsock fix etc to get reconnected. I have connected a
>> Hawking USB device to send this message and to get tall the Windows XP
>> updates.
>>
>> Both Wireless and wireless conection fail.
>>
>> Wired - shows network cable unplugged with cable plugged in. There are
>> no updates to Broadcom 440x 10/100 controller.
>> When I right click, I get options - disbale, bridge and properties. I
>> am running TCP/IP
>> How do I get the fixed?
>>
>> No virus and spyware - all fixed. I have added ZA free and Avast AV.
>>
>> thanks
>>

What Router are you trying to connect to?
--
Mad Mike


"David Sherman" wrote:

>
> Windows XP media center on Dell Inspiron E1505. Under network
> connections, I right click on wired, it says disable not enable.
> Wireless says the same. Wireless sees wireless network, but doesness
> connect. It won't even connect to an open network. I am tryung to
> connect either to DSL or Cable. Wireless/Wired cards are Broadcom
> 440x.
>
> thanks
>
>
>
> On Fri, 3 Oct 2008 18:11:18 -0400, "Jack \(MVP-Networking\)."
> <jack@discussiongroup.com> wrote:
>
> >Hi
> >Please describe what actually (type of connection and hardware) you use to
> >connect to the Internet.
> >Jack (MS, MVP-Networking)
> >
> >
> >"David Sherman" <dshermin@ameritech.net> wrote in message
> >news:r6ece49tpjtrf7lva78c31pdi2tgmpmjsi@4ax.com.. .
> >>I am trying to get a Dell Inspron Laptop reconnected to the net.
> >>
> >> I have run Winsock fix etc to get reconnected. I have connected a
> >> Hawking USB device to send this message and to get tall the Windows XP
> >> updates.
> >>
> >> Both Wireless and wireless conection fail.
> >>
> >> Wired - shows network cable unplugged with cable plugged in. There are
> >> no updates to Broadcom 440x 10/100 controller.
> >> When I right click, I get options - disbale, bridge and properties. I
> >> am running TCP/IP
> >> How do I get the fixed?
> >>
> >> No virus and spyware - all fixed. I have added ZA free and Avast AV.
> >>
> >> thanks
> >>
>
>

Linksys using DD-wrt


On Sat, 4 Oct 2008 05:57:00 -0700, Mick Murphy
<MickMurphy@discussions.microsoft.com> wrote:

>What Router are you trying to connect to?

Hi
When the right click on the Network Card says Disable it means that the card
is currently enable and it gives you the option to Disable it.
So make sure that the Wire says Enable (I.e it is in state of Disable), and
that the Wireless says Disable (I.e it currently Enabled), and try to
connect while the security is Off in the Router and the computer.
In general.
My Wireless does not work - http://www.ezlan.net/wireless.html
Wireless Basic Configuration - http://www.ezlan.net/Wireless_Config.html
Wireless Security - http://www.ezlan.net/Wireless_Security.html
Jack (MS, MVP-Networking)

"David Sherman" <dshermin@ameritech.net> wrote in message
news:8ojee4l50548d5afrs2ug6ee6d0248007h@4ax.com...
>
> Windows XP media center on Dell Inspiron E1505. Under network
> connections, I right click on wired, it says disable not enable.
> Wireless says the same. Wireless sees wireless network, but doesness
> connect. It won't even connect to an open network. I am tryung to
> connect either to DSL or Cable. Wireless/Wired cards are Broadcom
> 440x.
>
> thanks
>
>
>
> On Fri, 3 Oct 2008 18:11:18 -0400, "Jack \(MVP-Networking\)."
> <jack@discussiongroup.com> wrote:
>
>>Hi
>>Please describe what actually (type of connection and hardware) you use to
>>connect to the Internet.
>>Jack (MS, MVP-Networking)
>>
>>
>>"David Sherman" <dshermin@ameritech.net> wrote in message
>>news:r6ece49tpjtrf7lva78c31pdi2tgmpmjsi@4ax.com. ..
>>>I am trying to get a Dell Inspron Laptop reconnected to the net.
>>>
>>> I have run Winsock fix etc to get reconnected. I have connected a
>>> Hawking USB device to send this message and to get tall the Windows XP
>>> updates.
>>>
>>> Both Wireless and wireless conection fail.
>>>
>>> Wired - shows network cable unplugged with cable plugged in. There are
>>> no updates to Broadcom 440x 10/100 controller.
>>> When I right click, I get options - disbale, bridge and properties. I
>>> am running TCP/IP
>>> How do I get the fixed?
>>>
>>> No virus and spyware - all fixed. I have added ZA free and Avast AV.
>>>
>>> thanks
>>>
>

Failure again. I need to find out how to get a new internat NIC card
into thi s machine. I installed Windows twice yesterday with the same
results

thanks for the help.

On Sat, 4 Oct 2008 22:05:13 -0400, "Jack \(MVP-Networking\)."
<jack@discussiongroup.com> wrote:

>Hi
>When the right click on the Network Card says Disable it means that the card
>is currently enable and it gives you the option to Disable it.
>So make sure that the Wire says Enable (I.e it is in state of Disable), and
>that the Wireless says Disable (I.e it currently Enabled), and try to
>connect while the security is Off in the Router and the computer.
>In general.
>My Wireless does not work - http://www.ezlan.net/wireless.html
>Wireless Basic Configuration - http://www.ezlan.net/Wireless_Config.html
>Wireless Security - http://www.ezlan.net/Wireless_Security.html
>Jack (MS, MVP-Networking)
>
>"David Sherman" <dshermin@ameritech.net> wrote in message
>news:8ojee4l50548d5afrs2ug6ee6d0248007h@4ax.com.. .
>>
>> Windows XP media center on Dell Inspiron E1505. Under network
>> connections, I right click on wired, it says disable not enable.
>> Wireless says the same. Wireless sees wireless network, but doesness
>> connect. It won't even connect to an open network. I am tryung to
>> connect either to DSL or Cable. Wireless/Wired cards are Broadcom
>> 440x.
>>
>> thanks
>>
>>
>>
>> On Fri, 3 Oct 2008 18:11:18 -0400, "Jack \(MVP-Networking\)."
>> <jack@discussiongroup.com> wrote:
>>
>>>Hi
>>>Please describe what actually (type of connection and hardware) you use to
>>>connect to the Internet.
>>>Jack (MS, MVP-Networking)
>>>
>>>
>>>"David Sherman" <dshermin@ameritech.net> wrote in message
>>>news:r6ece49tpjtrf7lva78c31pdi2tgmpmjsi@4ax.com ...
>>>>I am trying to get a Dell Inspron Laptop reconnected to the net.
>>>>
>>>> I have run Winsock fix etc to get reconnected. I have connected a
>>>> Hawking USB device to send this message and to get tall the Windows XP
>>>> updates.
>>>>
>>>> Both Wireless and wireless conection fail.
>>>>
>>>> Wired - shows network cable unplugged with cable plugged in. There are
>>>> no updates to Broadcom 440x 10/100 controller.
>>>> When I right click, I get options - disbale, bridge and properties. I
>>>> am running TCP/IP
>>>> How do I get the fixed?
>>>>
>>>> No virus and spyware - all fixed. I have added ZA free and Avast AV.
>>>>
>>>> thanks
>>>>
>>